90• Set to ALM-PRIRecords the alarm-activated input images preferentially over other video inputs.• Set to ALM-ONLYRecords the particular images that have activated the alarm.• Set to ALM-MULTI• Records alarm images and creates thumbnails of images that have most recently received an alarm.• Records alarm images that is chosen detecting the rest of alarm duration every alarm inputs.• Records alarm images according to the REC RATE(BASE) in evenly until reaches REC RATE(MAX). Then thesum exceeds the maximum recording rate, it records images at maximum rate. Alarm Recording for Internal Timer ModesAs described before, there are three recording modes for Timer Recording: Time Lapse, Multi Shot and One Shot Recording.Two of these, Multi Shot and One Shot recording, are event-recording functions reacting to an alarm input. Therefore, there isno difference compared to an alarm recording.The procedure described below is an example for alarm recording in the Time Lapse Recording mode.• Time Lapse RecordingWhen the Time Lapse Recording mode is selected for Timer recording, it records the alarm-activated images in this modewith the specified recording rate, image quality and duration, as shown below.The recording pattern varies according to the setting of the Dynamic Recording parameter (DYNAMIC REC).(If the camera inputs 2, 4 and 5 are assigned to a group.)• Set to OFFRecords the group input images in sequence starting with the lower number of the video input.C2 C2C4 C5 C2 C4 C5 C2 C4 C5 C2 C4 C5T TStartThumbnail ThumbnailAlarm 2 inC2 C4C4 C5 C2 C2 C4 C4 C4 C5 C2 C4 C4T TStartThumbnail ThumbnailAlarm 4 in Alarm 5 inT ThumbnailC5 C5 C4 C2C2 C2C4 C5 C2 C2 C2 C2 C2 C5 C5 C5 C5T T TStartThumbnail Thumbnail ThumbnailAlarm 2 in Alarm 5 inC1 C2 C16 C4 C4 C4 C4 C15 C4T T TStartThumbnail Thumbnail ThumbnailAlarm 4 in Alarm 15 inC4 C15 C4C15 C15 C3 C15 C3 C15-----Alarm 3 inT ThumbnailAlarm 4 durationAlarm 15 duration