Panasonic WJ-HD500B Operating Instructions Manual

Contents

Panasonic WJ-HD500B Operating Instructions Manual Manual pdf 82 page image

826. To return to Spot monitoring, select an image to be dis-played on the monitor by pressing a numeric button (1 -16).Notes:• You can also enable the Auto Skip function to skipany steps when no video signal is present.Refer to AUTO SKIP in the 5 - 1 SEQUENCE SETUPfor further details.• The setting can be adjusted in such a way that thesequence step for displaying an image on the SpotMonitor screen in the single spot mode can beskipped automatically.Refer to the SECRET VIEW in the 5 MULTIPLEXERSETUP for further details. Group Single Sequence (Live)An assigned group camera image can be displayed in suc-cession on the monitor screen for the specified duration.Refer to GROUP SEQ in the 5 - 1 SEQUENCE SETUP forfurther details.1. Select the group to be displayed by pressing theGROUP SELECT button (indicator on).Pressing this button toggles the group display and seg-ment images on the monitor as shown below.G1: Group 1G2: Group 2G3: Group 3G4: Group 4none: All Inputs2. Select one of the images by pressing the correspond-ing numeric button; the indicator in the button lights up.The indicator in the selected button lights and the cam-era image corresponding to the button appears in thespot mode on the monitor screen.3. Press the SEQUENCE button to run the sequence for-ward on the monitor screen.The indicator in the button lights to indicate that thesequence mode is selected.GROUPSELECT 1 24 5322 Single Sequence (Live)A series of camera images can be displayed in successionon the monitor screen for the specified duration.Refer to the 5 - 1 - 3 SPOT LIVE SEQUENCE SETUP for fur-ther details.1. Select the input mode for all groups by pressing theGROUP SELECT button (indicator off).Pressing this button toggles the group display on themonitor as shown below.(The indicator in the button lights while any of thegroups is selected.)G1: Group 1G2: Group 2G3: Group 3G4: Group 4none: All Inputs2. Select one of the images by pressing the numeric but-ton (1 - 16).The indicator in the selected button lights and the cam-era image corresponding to the button appears in thespot mode on the monitor screen.3. Press the SEQUENCE button to run the assignedsequence forward on the monitor screen.The indicator in the button lights to indicate that thesequence mode is selected.The indicator in the numeric button lights up and thecamera image corresponding to the button appears onthe monitor screen.4. During the sequence, press the SEQUENCE button topause the sequence that is being run on the monitorscreen.The indicator in the button blinks to indicate thesequence is paused.5. Press the SEQUENCE button to restart the sequenceforward from the step that was previously paused bypressing the SEQUENCE button.The indicator in the button changes to a steady light.GROUPSELECTSEQUENCE 1 216 3SEQUENCESEQUENCE 1 25 34