|
306. Select either "1DISK" or "ALL" by pressing the A or Bbutton, then press the SET button.1DISK: Enables formatting only a specified Hard Disk.ALL: Enables formatting all Hard Disks.If the "1DISK" is selected in the menu, move the cursorto the Hard Disk number to be formatted by pressingthe A, B, D or C button, then press the SET button.The instructions appear in the lower-left corner of themenu, as shown below.7. Select "YES" in the menu by pressing the A or B but-ton, then press the SET button to start formatting.8. When the formatting is completed, "FORMAT DONE!"appears in the lower center of the menu.<1DISK Selection>• Then the menu display will return to step 6 for for-matting another Hard Disk.Repeat the procedure 6 to 8 to format the anotherdisk.• To quit formatting, move the cursor to RESTART inthe menu by pressing the A, B, D or C button,then press the SET button to restart the DiskRecorder.Normal camera images will appear on the monitor.• Normal camera images will appear on the monitorafter five seconds.1DISK FORMATMAIN 1:¢¢GB 2:¢¢GBEXT5 1:¢¢GB 2:¢¢GB 3:¢¢GB 4:¢¢GBEXT4 1:ADD 2:ADD 3:ADD 4:ADDEXT3 1:- 2:- 3:- 4:-EXT2 1:- 2:- 3:- 4:-EXT1 1:- 2:- 3:- 4:-EXT0 1:- 2:- 3:- 4:-EXT DVD:-EXECUTE? YES NOSELECT YES/NO AND PRESS [SET] KEY1DISK FORMATMAIN 1:¢¢GB 2:¢¢GBEXT5 1:¢¢GB 2:¢¢GB 3:¢¢GB 4:¢¢GBEXT4 1:ADD 2:ADD 3:ADD 4:ADDEXT3 1:- 2:- 3:- 4:-EXT2 1:- 2:- 3:- 4:-EXT1 1:- 2:- 3:- 4:-EXT0 1:- 2:- 3:- 4:-EXT DVD:-FORMAT DONE!
|
