4 - FLIGHT PLANS67Flight Plan CatalogSection 4Flight PlansThe 400W-series lets you create up to 20 differ-ent flight plans, with up to 31 waypoints in each flightplan. The flight plan page group consists of two pages,accessed by pressing the FPL key. The Active FlightPlan page shows the legs and details in the active flightplan. The Flight Plan Catalog contains flight plans thatyou have created and saved for future use. The flightplan pages allow you to create, edit and copy flightplans. There are separate options available in both theActive Flight Plan page and the Flight Catalog page.Active Flight Plan Page Flight Plan Catalog PageFlight Plan CatalogThe Flight Plan Catalog allows you to create, edit,activate, delete and copy flight plans. Flight plansnumbered from 1 through 19 are used to save flightplans for future use. “Flight plan 00” is reserved exclu-sively for the flight plan currently in use for naviga-tion. Any time you activate a flight plan, a copy of theflight plan is automatically transferred to “flight plan00” and overwrites any previously active flight plan.Flight Plan Catalog EditingTo add a waypoint to an existing flight plan:1. Press FPL and turn the small right knob todisplay the flight plan catalog.2. Press the small right knob to activate thecursor.3. Turn the large right knob to highlight thedesired flight plan and press ENT.4. Turn the large right knob to select the pointwhere you wish to add the new waypoint. Ifan existing waypoint is highlighted, the newwaypoint will be placed directly in front of thiswaypoint.5. Use the small and large right knobs to enterthe identifier of the new waypoint and pressENT.6. Once all changes have been made, press thesmall right knob to return to the flight plancatalog.To delete a waypoint from an existing flight plan:1. Press FPL and turn the small right knob todisplay the flight plan catalog.2. Press the small right knob to activate thecursor.3. Turn the large right knob to highlight thedesired flight plan and press ENT.4. Turn the large right knob to select thewaypoint you wish to delete and press CLRto display a “remove waypoint” confirmationwindow.
