9 - AUX PAGES161Utility PageFlight TimersTo view, use or reset the generic timer:1. Select “Flight Timers” from the utility page.2. The flashing cursor highlights “Start?”. To startthe generic timer, press ENT. (You will typicallybegin with this step for count up timers. How-ever, for count down timers, you may wish toenter a count direction and time before startingthe timer. )3. To change the count direction, turn the largeright knob to highlight count direction field:“Down” or “Up”. Turn the small right knobto select the desired count direction. Press ENTwhen finished.4. For a count down timer, turn the large rightknob to highlight the time field. Use the smalland large right knobs to enter the countdown time—in hours, minutes and seconds.Press ENT when finished.5. To stop the generic timer, turn the large rightknob to highlight “Stop?” and press ENT.6. To reset the generic timer, turn the large rightknob to highlight the time field. Press CLR,followed by ENT.To record or reset the departure time:1. Select “Flight Timers” from the utility page.2. Turn the large right knob to highlight thereset mode field, under “Departure Time”.(The reset mode field will indicate “Pwr-on”or “GS>30kt”.)3. Turn the small right knob to select the desiredreset mode. (“Pwr-on” will record a departuretime when the 400W-series unit is turned on.“GS>30kt” will record a departure time oncethe GPS-computed ground speed exceeds 30knots.)4. Press ENT when finished.5. To reset the departure time, turn the largeright knob to highlight “Reset?” and pressENT.To view, use or reset total trip time:1. Select “Flight Timers” from the utility page.2. Turn the large right knob to highlight thereset mode field, under “Total Trip Time”.(The reset mode field will indicate “Pwr-on”or “GS>30kt”.)3. Turn the small right knob to select the desiredreset mode. (“Pwr-on” will record trip time, inhours/minutes/seconds, any time the 400W-series unit is turned on. “GS>30kt” will recordtrip time any time the GPS-computed groundspeed exceeds 30 knots.)4. Press ENT when finished.
