2 - NAV PAGES40Data Fields on the MapThe “Data Fields Off?” option provides a full-screenmap display (shown bottom right), without the fourdata fields along the right-hand side of the screen.Select this option when you wish to display a largermap area. If this option has been selected and thedata fields are off, “Data Fields On?” will appear as anoption instead.To turn the data fields on or off, press MENU andturn the large right knob to highlight “Data FieldsOff?” (or “Data Fields On?”), then press ENT.Selecting Desired On-Screen Data“Change Fields?” allows you to choose the datadisplayed on the four user-selectable data fields alongthe right-hand side of the map page. There are twelveavailable data types, including bearing to destina-tion, distance to destination, estimated time of arrival,ground speed, minimum safe altitude and track. SeeSection 11 for descriptions of these (and other) naviga-tion terms.To change a data field:1. Press MENU on the Map page and then turnthe large right knob to highlight “ChangeFields?”. Then, press ENT.2. Turn the large right knob to highlight thedata field you wish to change.3. Turn the small right knob to select the typeof data you want to appear on this field andpress ENT.4. Press the small right knob to remove thecursor.NOTE: The on-screen traffic information will oc-cupy two data fields, leaving room to display onlytwo additional data types. Traffic information isonly available when the 400W-series installationincludes connection to traffic information sources.See the 400W Series Pilot’s Guide Addendum,part number 190-00356-31.Map Page Options
