3 - DIRECT-TO63Selecting a Destination from the Active FlightPlanIf you’re navigating an active flight plan, anywaypoint contained in the flight plan may be selectedas a direct-to destination from the select direct-towaypoint page. (see Section 4 - Flight Plans, for moreinformation on flight plans.)To select a direct-to destination from the activeflight plan:1. Press the direct-to key. The select direct-towaypoint page will appear, with the waypointidentifier field highlighted.2. Turn the large right knob to highlight theflight plan (FPL) field.3. Turn the small right knob to display a windowshowing all waypoints in the active flightplan.4. Continue turning the small right knob toscroll through the list and highlight the desiredwaypoint.5. Press ENT to confirm the selected waypoint,and ENT to activate the direct-to function.Selecting the Nearest Airport as a Direct-ToDestinationThe select direct-to waypoint page always displaysthe nearest airports (from your present position) onthe NRST field. Navigating directly to a nearby airportis always just a few simple steps away. (Nearby airportsmay also be selected as direct-to destinations using thesteps described Section 7 - NRST Pages - Navigating toa Nearby Waypoint.)To select a nearby airport as a direct-to destina-tion:1. Press the direct-to key. The select direct-towaypoint page will appear, with the waypointidentifier field highlighted.2. Turn the large right knob to highlight thenearest airport (NRST) field.3. Turn the small right knob to display a windowshowing up to nine nearby airports.4. Continue turning the small right knob toscroll through the list and highlight the desiredairport.5. Press ENT to confirm the selected airport, andENT to activate the direct-to function.NOTE: Performing a direct-to for the MAP of anactive approach will cancel approach mode.Selecting a Destination
