2 - NAV PAGES35Map PageMap PanningPanning allows you to move the map beyond itscurrent limits without adjusting the map range. Whenyou select the panning function — by pressing thesmall right knob — a target pointer will flash on themap display. A window will also appear at the top ofthe map display showing the latitude/longitude posi-tion of the pointer, plus the bearing and distance tothe pointer from your present position.To select the panning function and pan the mapdisplay:1. Press the small right knob to activate thepanning target pointer.2. Turn the small right knob to move up (turnclockwise) or down (counterclockwise).3. Turn the large right knob to move right (turnclockwise) or left (counterclockwise).4. To cancel the panning function and return toyour present position, press the small rightknob.When the target pointer is placed on an object,the name of that object will be highlighted (even ifthe name wasn’t originally displayed on the map).This feature applies to airports, navaids, user-createdwaypoints, roads, lakes, rivers — almost everythingdisplayed on the map except route lines.When an airport, navaid, or user waypoint isselected on the map display, you can review informa-tion about the waypoint or designate the waypoint asyour direct-to destination.To review information for an on-screen airport,navaid or user waypoint:1. Use the panning function (as described above)to place the target pointer on a waypoint.2. Press ENT to display the waypoint informationpage(s) for the selected waypoint.3. Press CLR to exit the information page(s).
