6 - WPT PAGES115Duplicate WaypointsDuplicate WaypointsOnce the identifier, facility name or location isentered, all six airport pages will display informa-tion for the selected airport. As you enter an iden-tifier, facility name or location, the 400W-seriesSpell’N’Find™ feature will scroll through the database,displaying those waypoints matching the charactersyou have entered to that point. If duplicate entriesexist for the entered facility name or location, addi-tional entries may be viewed by continuing to turnthe small right knob during the selection process.If duplicate entries exist for an entered identifier, aduplicate waypoint page will appear once you select theidentifier (by pressing ENT).To select a facility name or location, where dupli-cate entries exist:1. Select the desired facility name or location.2. As you spell the facility name or location,using the small and large right knobs, the400W-series Spell’N’Find feature will selectthe first entry in the database based upon thecharacters you have entered up to that point.3. Continue turning the small right knob toscroll through any additional database listingsfor the selected facility name or location. Youcan scroll backwards with the small rightknob if you scroll past the desired facility nameor location.4. Press ENT to select the desired facility nameor location.5. To remove the flashing cursor, press the smallright knob.To select a waypoint identifier from a list ofduplicates:1. Select the desired airport or navaid identifier.2. A duplicate waypoints window will appear.Turn the large right knob to select the desiredwaypoint and press ENT.3. To remove the flashing cursor, press the smallright knob.
