6 - WPT PAGES131User Waypoint Page Options3. The top of the user waypoint list will indicatethe total number of user waypoints currentlyused and available memory. If more userwaypoints are stored than can be displayedon a single screen, turn the large right knobto scroll through the user waypoint list.4. Press the small right knob to return to theuser waypoint page.Delete User Waypoint? allows you to delete theselected waypoint from memory.To delete a user waypoint:1. Select the desired waypoint on the userwaypoint page and press MENU to displaythe user waypoint page options.2. Turn the large right knob to highlight “DeleteUser Waypoint?” and press ENT.Crossfill? allows you to transfer a user waypointto another 400W/500W series unit (if installed).User Waypoint ListThe user waypoint list allows you to review,modify, rename or delete a selected user waypoint,or to delete all user waypoints currently stored inmemory. The top of the page shows the number ofwaypoints used and available memory.To review and/or modify a user waypoint from theuser waypoint list:1. Select the user waypoint list, as described inthe User Waypoint Options.2. Turn the large right knob to highlight thedesired user waypoint.3. Press ENT to display the user waypoint page forthe selected waypoint. From this page you mayreview all information defining the waypointand its position.4. To modify the waypoint’s position or refer-ence waypoint information, follow the stepsdescribed “Modifying User Waypoints.” (Keepin mind that you’ve already selected a userwaypoint page which displays the desired userwaypoint, so you may skip the first two stepsof the procedure.)5. To exit the user waypoint page, turn the largeright knob to highlight “Done?” and pressENT.
