9 - AUX PAGES150Flight PlanningFlight Planning PageThe flight planning page provides access to E6Bfunctions for fuel planning, trip planning, densityaltitude/true airspeed/winds aloft calculations anda “Crossfill” function to transfer flight plans/userwaypoints to a second 400W-series unit. When a flightplanning item is selected, the corresponding page willappear providing additional information and features.To select, highlightwith cursor andpress ENT.First Pagein AUX groupTo select an item from the flight planning page:1. Press the small right knob momentarily, toactivate the flashing cursor.2. Turn the large right knob to select the desiredmenu option, and press ENT.The following flight planning items are available:Fuel Planning— when equipped with fuel flow(FF) and/or fuel on board (FOB) sensors, this itemdisplays current fuel conditions along the activedirect-to or flight plan. You may also manuallyenter fuel flow, ground speed (GS) and (in someinstances) fuel on board figures for planning pur-poses. Fuel planning figures can be displayed notonly for the currently active flight plan or direct-to, but also point-to-point between two specifiedwaypoints and for any programmed flight plan.Trip Planning— allows the pilot to view desiredtrack (DTK), distance (DIS), estimated time enroute (ETE), en route safe altitude (ESA) andestimated time of arrival (ETA) information for adirect-to, point-to-point between two specifiedwaypoints or for any programmed flight plan.NOTE: Point-to-point waypoints, flight plansand/or ground speed (default is current GPS-calculated ground speed) entered on the fuelplanning page will automatically transfer to thetrip planning page, and vice versa.
