9 - AUX PAGES157Flight PlanningSchedulerTo enter a scheduled message:1. Select “Scheduler” from the flight planningpage.2. The flashing cursor highlights the first messagefield. If necessary, turn the large right knobto highlight the first blank message field.3. Use the small and large right knobs to enterthe message text. Press ENT when finished.(The 400W-series unit will store up to ninescheduled messages holding 20 characterseach.)4. The flashing cursor moves to the type fieldunder the new message. Turn the small rightknob to display a window of available options:(Event, One Time, Periodic). Press ENT toselect.5. The flashing cursor moves to the time/datefield. Use the small and large right knobs toset the time or date required before the mes-sage is displayed. Time is entered as hours/min-utes (hhh:mm). Event-based messages expireat a specific date and time. Press ENT, whenfinished.To edit a scheduled message:1. Select “Scheduler” from the flight planningpage.2. The flashing cursor highlights the first messagefield.3. To edit the message text, turn the large rightknob to highlight the desired message field. Usethe small and large right knobs to edit themessage text—entering the new text directly overthe old message. Press ENT when finished.4. To edit the time field, turn the large rightknob to highlight the field. Use the smalland large right knobs to edit the new dateor time—entering the new value directly overthe old figure. Press ENT when finished.To delete a scheduled message:1. Select “Scheduler” from the flight planningpage.2. The flashing cursor highlights the first messagefield. Turn the large right knob to highlightthe desired message field.3. Press CLR to delete the message text, followedby ENT to confirm the deletion.
