Note• If an error message is displayed, check the settings and correct any invalid values.• To cancel this process, press the Stop button.Specifying NetWare Print ServicesBefore printing in a NetWare network, you must configure print services such as print servers, print queues, and so on. Youcan configure the print service settings from a computer using any of the following Novell software provided with NetWare.• NWADMIN• PCONSOLEImportant• If you use NWADMIN to configure the print service settings, Novell Client (the Novell NetWare client soft-ware) must be installed as the client software application.• NetWare networking is unsupported in Windows Vista and Windows Server 2008.This topic gives instructions for configuring NetWare print services. The order of this procedure may vary depending on theenvironment.Choosing the type of print servicesBefore completing print service settings, choose the type of print service. Refer to the following descriptions as needed.Note• In NetWare 5.1 or 6.0, NDPS may also be used as the print service. If you use NDPS, use the Novell printergateway included with NetWare. For details on configuring NDPS, refer to the NetWare documentation.• NDS (Novell Directory Service) and binderyNDS and bindery are both supported. Use the mode that is compatible with your network environment.• Queue server mode and remote printer modeQueue server mode and remote printer mode are both supported.• Queue server modeWhen using queue server mode, all print server functions are supported, so there is no need for other print serversoftware or hardware. In NDS queue server mode (NDS PServer), the NDS print server is used for printing. Inbindery queue server mode (Bindery PServer), the bindery print server is used for printing. Note that if you usequeue server mode, a NetWare user license is required for each network interface.• Remote printer modeIn remote printer mode, the printer is controlled by the NetWare print server. Thus, a NetWare print server is re-quired. In NDS remote printer mode (NPrinter), the NDS print server is used for printing, and in bindery remoteprinter mode (RPrinter), the bindery print server is used for printing.Using NWADMIN or PCONSOLE to set up the print serverUse NWADMIN to set up the print server if NDS queue server mode or remote printer mode is used.1. Log into NetWare as Administrator or with equivalent rights, and then start NWADMIN.2. Run Quick Setup.1. Choose Print Services Quick Setup in the Tools menu.Network Setting > Network Setting (Windows) >Specifying NetWare Print Services iPF6509706
