Note• Not all page sizes are available.• Even if you prepare originals of the same size as the paper size, the originals are automatically enlargedwhen you print borderlessly in combination with resizing originals to match the paper size. This may affectimage quality. When image quality is most important, make the original 3 mm longer on each side than thepaper size so that the image can be printed at actual size in borderless printing.For instructions on borderless printing of photos and images at actual size, refer to the following topics, as appropriate foryour computer and operating system.• Borderless Printing at Actual Size (Windows) →P.91• Borderless Printing at Actual Size (Mac OS X) →P.93Borderless Printing at Actual Size (Windows)This topic describes how to print borderlessly at actual size based on the following example.• Document: Any type• Page size: 10×12 inches (254.0×304.8 mm)• Paper: Roll• Paper type: Heavyweight Coated Paper• Roll paper width: 10 inches (254.0 mm)1. Create the original in the source application 3 mm (0.12 in) larger on each side than 254.0×304.8 mm (10 × 12 in)—that is, 260.0×310.8 mm (10.2 × 12.2 in)Note• If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions onspecifying the margin, refer to the software documentation.• The extra 3 mm (0.12 in) on each side will not be printed. Create the original so that it fits inside thepaper area to be printed on.2. Choose Print in the application menu.3. Select the printer in the dialog box, and then display the printer driver dialog box.(See "Accessing the Printer Driv-er Dialog Box from Applications (Windows) →P.210 ")Enhanced Printing Options > Printing at full size >iPF650 Borderless Printing at Actual Size (Windows)391
