12. Press the Back button.13. Press ▲ or ▼ to select Register Setting, and then press the OK button.14. Press ▲ or ▼ to select Yes, and then press the OK button.The adjustment value is now registered, and adjustment is complete.Adjusting Line Misalignment (Head Inc. Adj.)If printed lines are misaligned, execute Head Inc. Adj. to adjust the angle of inclination of the Printhead. Executing HeadInc. Adj. requires you to examine a printed test pattern and enter an adjustment value.Paper to PrepareRolls An unused roll at least 10 inches wideSheets One sheet of unused paper of at least A4/Letter sizePerform adjustment as follows.1. Load the paper.• Attaching the Roll Holder to Rolls →P.568• Loading Rolls in the Printer →P.572• Loading Sheets in the Printer →P.594Note• When loading paper, specify the type of paper correctly. Using paper that you have not specified onthe printer may cause feeding problems and affect the printing quality.• We recommend loading a type of paper that you use often.2. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.3. Press the OK button.The Set./Adj. Menu is displayed.4. Press ▲ or ▼ to select Adjust Printer, and then press the OK button.5. Press ▲ or ▼ to select Head Inc. Adj., and then press the OK button.After the Carriage is moved, a message is displayed requesting you to open the Top Cover.Adjustments for Better Print Quality > Adjusting the Printhead >iPF650 Adjusting Line Misalignment (Head Inc. Adj.)7611
