Images are printed crookedCause Corrective ActionIn the Control Panel menu, Skew Check Lv. is set toLoose or Off.In the Control Panel menu, set Skew Check Lv. to Stand-ard.In the Control Panel menu, Width Detection is set toOff.Set Width Detection to On in the Control Panel menu.Documents are printed in monochromeCause Corrective ActionIn the Advanced Settings of the printer driver,Monochrome, Monochrome (BK ink), orMonochrome Bitmap is specified in ColorMode.In the Advanced Settings of the printer driver, specify Color inColor Mode and try printing again.The Printhead nozzles are clogged. Print a test pattern to check the color ink nozzles and see if they areclogged.(See "Checking for Nozzle Clogging.") →P.728Line thickness is not uniformCause Corrective ActionIn the Special Settings dialog boxof the Windows printer driver, FastGraphic Process is selected.Access the printer driver Properties dialog box from Print in the File menu ofthe source application, and follow these steps to print.1. Clear the option Open Preview When Print Job Starts on the Main sheet.2. Clear the option Page Layout on the Layout sheet.3. Click the Special Settings button in the Layout sheet to open the SpecialSettings dialog box, and remove the check from Fast Graphic Process.The type of paper specified in theprinter driver does not match thetype loaded in the printer.Load paper of the same type as you have specified in the printer driver.(See "Loading Rolls in the Printer.") →P.572(See "Loading Sheets in the Printer.") →P.594Make sure the same type of paper is specified in the printer driver as you haveloaded in the printer.1. Press the Stop button and stop printing.2. Change the type of paper in the printer driver and try printing again.Lines are misalignedCause Corrective ActionThe Printhead alignment is not ad-justed.Adjust the Printhead alignment.(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi.Adj.).") →P.607Troubleshooting > Problems with the printing quality >Images are printed crooked iPF65011778
