Paper is crooked.Cause Corrective ActionPaper loaded crooked was detected when the paper was advanced. Follow these steps to reload the roll.1. Push the Release Lever back.2. Adjust the right edge of the roll to make it par-allel to the orange Paper Alignment Line.3. Pull the Release Lever forward.(See "Loading Rolls in the Printer.") →P.572If this error recurs after you reload the roll, re-move the Roll Holder from the printer, push theroll firmly in until it touches the Roll Holderflange, and reload the Roll Holder in the printer.(See "Attaching the Roll Holder to Rolls.")→P.568Follow these step to reload a sheet.1. Push the Release Lever back.2. Pull out the sheet.3. Pull the Release Lever forward.4. Reload the sheet, aligning it with the guide onthe right.(See "Loading Sheets in the Printer.") →P.594Note• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off orLoose in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing prob-lems because paper may be askew when printed. Also, the Platen may become soiled, which may soil theback of the next document when it is printed.Paper not aligned with right guide.Cause Corrective ActionWhen paper was loaded, it was not aligned with the guideon the right side.Follow these step to reload a sheet.1. Push the Release Lever back.2. Pull out the sheet.3. Pull the Release Lever forward.4. Reload the sheet, aligning it with the guide on the right.Cannot detect paprCause Corrective ActionThe paper has come out of the printer. Follow these step to reload a sheet.Error Message > Messages regarding paper >Paper is crooked. iPF65012802
