Set./Adj. MenuSetting Item Description, InstructionsTestPrintNozzle Check Print a test pattern to check the nozzles.Status Print Print information about the printer.Interface Print Print interface settings information.GL2 Set Print Print GL2 settings information.Paper Details Print the paper settings as specified in Paper Details.Print Job Log Print a record of print jobs, including the paper typeand size, amount of ink consumed, and so on. Inkconsumption indicates a rough estimate of how muchink was consumed per page.(*1 →P.667 )Menu Map Print the menu structure.Color Palette Print the GL2 color palette.AdjustPrinterHeadPosi.Adj.Auto(Standard) The printer prints and reads a test pattern for the au-tomatic adjustment of Printhead alignment relative tothe printing direction. (See "Automatic Adjustmentto Straighten Lines and Colors (Head Posi.Adj.).") →P.607Auto(Advanced) The printer prints and reads a test pattern for the au-tomatic adjustment of Printhead alignment relative tothe printing direction and spacing between nozzlesand colors. (See "Automatic Adjustment toStraighten Lines and Colors (Head Posi. Adj.).")→P.607Manual Print a test pattern for adjustment of Printhead align-ment relative to the printing direction. Enter the ad-justment value manually based on the resulting pat-tern. (See "Manual Adjustment to Straighten Linesand Colors (Head Posi. Adj.).") →P.609Head Inc. Adj. Print a test pattern for adjustment of the Printheadorientation. (See "Adjusting Line Misalignment(Head Inc. Adj.).") →P.611FeedPriori-tyAdj.Priori-tyAutomatic Specify exact paper feeding, if desired. Normally, se-lect Automatic. Choose Print Quality for attractiveprinting. Choosing Print Quality also makes bandingless noticeable. Choose Print Length if you prefer tofeed the paper an exact amount. However, note thatslight banding may occur in the direction of carriagescanning when Print Length is selected.Print QualityPrint LengthAdj.Quali-tyAuto(GenuinePpr) Specify this mode with paper identified in the PaperReference Guide.The printer prints and reads a test pattern for auto-matic adjustment of the feed amount. (See "Auto-matic Banding Adjustment (Adj. Quality).")→P.616Printer Parts > Control Panel >iPF650 Menu Settings8659
