Canon imagePROGRAF iPF650 User Manual

Also see for iPF650 - imagePROGRAF Color Inkjet Printer: Brochure & specs Install guide Basic guide Basic guide Brochure

Contents

Canon imagePROGRAF iPF650 User Manual Manual pdf 721 page image

Specifying the frame type using the printer Control Panel1. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2. Press the OK button.The Set./Adj. Menu is displayed.3. Press ▲ or ▼ to select Interface Setup, and then press the OK button.4. Press ▲ or ▼ to select NetWare, and then press the OK button.5. Press ▲ or ▼ to select NetWare, and then press the OK button.6. Press ▲ or ▼ to select On, and then press the OK button.The display reverts to the NetWare menu.7. Press ▲ or ▼ to select Frame Type, and then press the OK button.8. Press ▲ or ▼ to select the frame type to use, and then press the OK button.The display reverts to the NetWare menu.9. Press ▲ or ▼ to select Print Service, and then press the OK button.10. Press ▲ or ▼ to select the desired print service, and then press the OK button.The display reverts to the NetWare menu.11. Press the Menu button.If any of the settings is changed, a confirmation message is displayed. In this case, press the OK button.Important• Be sure to complete step 11. This will activate the values you have entered.Network Setting > Network Setting (Windows) >iPF650 Specifying the Printer's Frame Type9705