*10: Not displayed if IPv6 Support is Off.*11: Default setting for the time to enter the power save mode/Sleep mode is recommended.Menu SettingsMenu items are as follows.For instructions on selecting menu items, see "Menu Operations." →P.642For details on menu levels and values, see "Menu Structure." →P.645Paper MenuSetting Item Description, InstructionsLoad Paper Select sheets or rolls and load the paper.Eject Paper Choose this item before removing loaded paper.Chg. Paper Type (*1 →P.658 ) Change the type of paper loaded. (See "Changing the Typeof Paper.") →P.575Chg. Paper Size Change the size of paper loaded. (See "Specifying the Pa-per Length.") →P.577 (See "Paper Sizes.") →P.565ManageRemainRoll Choose On to print a barcode at the end of a roll before youremove it. The printed barcode can be used in managing theamount of roll paper left. Choose Off if you prefer not toprint the barcode.(See "Keeping Track of the Amount of Roll Paper Left.")→P.583Paper Details (The type of pa-per is displayedhere.)(*1 →P.658 )Head Height Adjust the Printhead height. (See "Troubleshooting PaperAbrasion and Blurry Images (Head Height).") →P.613Skew CheckLv.If you print on Japanese paper (washi) or other handmadepaper that has an irregular width, choose Loose for a higherskew detection threshold, or choose Off to disable skew de-tection. However, if paper is loaded askew when detection isOff, note that paper jams or Platen soiling may occur.Cutting Mode Specify whether or not to cut with the standard round-bladedcutter.Choose Automatic to have the roll cut automatically afterprinting. If you choose Manual, the paper will not be cut af-ter printing. Instead, a line will be printed at the cut position.Choose Eject if you prefer not to have documents droppedimmediately after printing, as when waiting for ink to dry.Cut Speed Choose the cutting speed. If you use adhesive paper, choos-ing Slow helps prevent adhesive from sticking to the cutterand keeps the cutter sharp.Trim EdgeFirstIf a roll is loaded, the end of the paper will be cut.CutDustRe-duct.If you choose On, a line will be printed at the cut positionwhen paper cutting is selected. This option reduces theamount of debris given off after cutting. It also helps preventadhesive from sticking to the cutter and keeps the cuttersharp if you use adhesive paper. (See "Reducing Dust fromCutting Rolls.") →P.593Printer Parts > Control Panel >Menu Settings iPF6508656
