Note• Even if there is a NetWare server in your network environment, you can use it in conjunction with TCP/IP or AppleTalk. In this case, complete the settings for each protocol you will use.Configuring the IP Address on the PrinterYou must configure the printer's IP address before using the printer in a TCP/IP network.The printer's IP address is configured automatically when you install the printer driver following the instructions in the Set-up Guide.Configure the IP address by using imagePROGRAF Device Setup Utility, the printer Control Panel, or ARP or PING com-mands, if the IP address is changed, or if you change the printer connection mode to a network connection. For details onconfiguring the IP address, refer to the following topics.• Configuring the IP Address Using imagePROGRAF Device Setup Utility →P.401 (Windows)• Configuring the IP Address Using the Printer Control Panel →P.689• Configuring the IP Address Using ARP and PING Commands →P.691Important• If you use a DHCP server for automatic assignment of the printer's IP address, printing may no longer bepossible after the printer is turned off and on. This is because an IP address different from before has beenassigned. Thus, when using DHCP server functions, consult your network administrator and configure thesettings in one of the following ways.• Configure the setting for dynamic DNS updatingIn RemoteUI, activate the setting Enable DNS Dynamic Update. (See "Configuring the Printer's TCP/IP Network Settings.") →P.693• Configure the setting for assignment of the same IP address each time the printer starts upNote• We recommend configuring the printer's IP address even if you will use the printer in networks other thanTCP/IP networks. Configuring the printer's IP address enables you to use RemoteUI to configure the networksettings and manage the printer with a web browser.For details on RemoteUI, see "Using RemoteUI." →P.692Configuring the IP Address Using the Printer Control PanelThis topic describes how to configure the printer's IP address on the Control Panel.1. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.Network Setting > Network Setting >iPF650 Configuring the IP Address on the Printer9689
