Cause Corrective ActionWhen Detect Mismatch in the ControlPanel menu is set to Warning, the typeof paper loaded does not match the typespecified in the printer driver.You can continue to print, but note that this error may cause problems inthe printing results.The paper is too small.Cause Corrective ActionWhen Detect Mismatch in the Control Panelmenu is set to Pause, paper smaller than thesize specified in the printer driver is loaded.Press ▲ or ▼ to select Print, and then press the OK button to resumeprinting.However, note that this error may cause paper jams and affect theprinting quality.Adjust the paper size setting in the printer driver to match the size loa-ded in the printer as follows.1. Press ▲ or ▼ to select Stop Printing, and then press the OK but-ton.2. Change the paper size setting in the printer driver to the size loadedin the printer and try printing again.Replace the loaded paper with paper of a size that matches the size set-ting in the printer driver as follows.1. Press ▲ or ▼ to select Change Paper, and then press the OK but-ton to stop printing.2. Replace the loaded paper to match the paper width setting in theprinter driver and try printing again.When Detect Mismatch in the Control Panelmenu is set to Warning, paper smaller thanthe size specified in the printer driver is loa-ded.You can continue to print, but note that this error may cause problemsin the printing results.The paper is too small."Replace paper with A4/LTR (vertical) or larger"Cause Corrective ActionThe loaded paper is too small. Replace the paper with paper of A4/Letter (vertical) size or larger as follows.1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper.(See "Removing Sheets.") →P.6012. Switch to paper A4/Letter (vertical) or larger.(See "Loading and Printing on Sheets.") →P.6The printer will resume printing.Press ▲ or ▼ to select Stop Printing, and then press the OK button.Error Message > Messages regarding paper >The paper is too small. iPF65012796