Cause Corrective ActionYou have attempted to print a test print sheet orother printer status information on a sheet, but nosheet is loaded.1. Press ▲ or ▼ to select Stop Printing, and then press the OKbutton to stop printing.2. Load a roll and try printing again.(See "Loading and Printing on Rolls.") →P.3Regular printing is selected, but a roll is loaded.Cause Corrective ActionA print job for printingon sheets was sentwhen a roll is loaded.1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop print-ing.2. After removing the roll, load and print on a sheet of the type and size of paper you havespecified in the printer driver.(See "Removing the Roll from the Printer.") →P.578(See "Loading and Printing on Sheets.") →P.6Paper jam"Push the release lever back."Cause Corrective ActionA paper jam oc-curred in the print-er during printing.1. Push the Release Lever back and remove the jammed paper.(See "Clearing Jammed Roll Paper.") →P.759(See "Clearing a Jammed Sheet.") →P.7632. Load the paper.3. Pull the Release Lever forward.4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen,press the OK button.Printing will resume, starting from the page on which the error occurred.(See "Loading Rolls in the Printer.") →P.572(See "Loading Sheets in the Printer.") →P.594"Manually rewind the roll all the way and press OK."Cause Corrective ActionA paper jam occur-red when advancingthe paper.1. Rewind paper on the Roll Holder manually, all the way, and then press the OK button.2. Load the paper.3. If "Not finished printing. Finish printing remaining jobs?" is shown on the DisplayScreen, press the OK button.Printing will resume, starting from the page on which the error occurred.(See "Loading Rolls in the Printer.") →P.572Error Message > Messages regarding paper >iPF650 Regular printing is selected, but a roll is loaded.12801
