Item Details Default SettingDNS Host Name Specify the printer host name, up to 63 characters (1–63 characters). Use single-byte letters, numbers, and -(hyphens). Do not use numbers or - for the first charac-ter or - for the last character.NB-18GBip6xxxxxxDNS Domain Name Specify the printer domain name, up to 63 characters.Use single-byte letters, numbers, - (hyphens), and . (pe-riods). Do not use numbers, -, or . for the first charac-ter, or - or . for the last character.blankPerform dynamic updating ofstateful addressesActivate this setting to automatically register the state-ful address with the DNS server.OffDynamically update the statelessaddressActivate this setting to automatically register the state-less address with the DNS server.OffDynamically update the manualaddressActivate this setting to automatically register the man-ual address with the DNS server.Off7. Click OK to display the Network page.Note• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS serv-ers and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNSDomain Name, respectively.Specifying Printer-Related InformationFollow the steps below to specify device information and security settings.1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUIpage.http://printer IP address or name/Example: http://xxx.xxx.xxx.xxx/2. Select Administrator Mode and click Logon.3. If a password has been set on the printer, enter the password.4. Click Information in the Device Manager menu at left to display the Information page.5. To display the relevant settings page, click Edit in the upper-right corner of Device Information or Security, de-pending on what information you want to specify.To change the administrator password, click the Change Password button in the Security group.6. Refer to the table of settings for device information and security as you complete these settings.Security setting items are displayed when you click the Change Password button in the Security group.Device Information SettingsItem Details Default SettingDevice Name Enter a device name.(0–32 characters)blankNetwork Setting > Network Setting >Specifying Printer-Related Information iPF6509696
