Setting Item Description, InstructionsAdjustPrinterFeedPriori-tyAdj.Quali-tyAuto(OtherPaper) Specify this mode with paper not in the Paper Refer-ence Guide.The printer prints and reads a test pattern for auto-matic adjustment of the feed amount. Note that thisfunction takes more time and consumes more inkthan Auto(GenuinePpr). (See "Automatic BandingAdjustment (Adj. Quality).") →P.616Manual Use this mode with highly transparent media or otherpaper for which Auto(GenuinePpr) or Auto(Other-Paper) cannot be used.Print a test pattern for adjustment of the feed amountbased on the type of paper. (See "Manual BandingAdjustment (Adj. Quality).") →P.618AdjustLengthAd-just-ment-PrintA:High Print a test pattern for particular types of paper tocompensate for paper stretching or shrinkage, afterwhich you enter the amount of adjustment. (See "Ad-justing Line Length (Adjust Length).") →P.620B:Standard/DraftChange Set-tingsA:High Displayed when you have selected Feed Priority >Adj. Priority > Print Length.Adjustment relative to the amount of stretching orshrinkage of the current paper.Enter either the adjustment results from Adjustment-Print or the discrepancy that you measured (as a per-centage).For paper that tends to stretch, increase the feedamount by choosing a higher adjustment value. Forpaper that tends to shrink, decrease the feed amountby choosing a lower adjustment value.B:Standard/DraftAdj. Fine Feed Displayed when you have selected Feed Priority >Adj. Priority > Automatic or Print Quality. Fine-tune the feed amount manually during printing. (See"Fine-Tuning the Paper Feed Amount (Adj. FineFeed).") →P.620Main-te-nanceHead Cleaning Clean the Printhead. (See "Cleaning the Print-head.") →P.729Choose Head Cleaning A if printing is faint, oddlycolored, or contains foreign substances.Choose Head Cleaning B if no ink is printed at all,or if printing is not improved by Head Cleaning A.Nozzle Check Print a test pattern to check the nozzles.Replace P.head When replacing the Printhead, choose Yes and followthe instructions on the screen. (See "Replacing thePrinthead.") →P.730Not displayed during a warning message that the re-maining Maintenance Cartridge capacity is low.Repl. maint cart When replacing the Maintenance Cartridge, chooseYes and follow the instructions on the screen. (See"Replacing the Maintenance Cartridge.")→P.737Printer Parts > Control Panel >Menu Settings iPF6508660
