CopyingWorkCentre 7500 Series Multifunction Printer 81User Guide5. Touch Advanced Settings, and set the available options:a. Under Side 1 Image, select one of the following: Image Inside Fold prints the image inside the fold. Image Outside Fold prints the image outside the fold.b. Under Collation, select one of the following: Collated Uncollatedc. Under Originals, select one of the following: Standard images are printed full size. Booklet Format images are reduced and printed in booklet format.6. To select the orientation of the originals, touch Original Orientation and select one of the followingfrom the drop-down menu: Upright Images are loaded upright into the document feeder. Sideways Images are loaded into the document feeder with the top edge to the left.7. Touch Save.Hole Punching CopiesIf your printer has the Professional Finisher, or the Office Finisher LX with the hole punching option, youcan hole punch your copies.Note: Some combinations of hole punching and stapling are not compatible. If a hole punch positionoverlaps with a staple position, that option is not available.To select hole punching:1. Press the Services Home button, then touch Copy.2. Under Copy Output, touch More.3. Under Hole Punch, touch one of the following: 2 Holes 3 HolesThe sample page shows the location of the holes.Note: Hole punching options depend on the paper size. If the desired hole punching option isunavailable, touch Paper Supply, then select the appropriate tray and touch Save. Touch Help fordetails.4. Touch Save.Stapling CopiesIf your printer has the Professional Finisher or the Office Finisher LX, you can staple your copies.
