Printing70 WorkCentre 7500 Series Multifunction PrinterUser GuideTo release a Secure Print job for printing:1. At the control panel, press the Job Status button.2. Touch the Secure Print tab.3. Touch the corresponding print job in the list, then touch Release.4. Use the keypad to enter the passcode number that you assigned to the print job.5. Touch Release Job to start printing.Sample SetThe Sample Set job type allows you to print a sample copy of a multiple-copy job and hold the remainingcopies at the printer. After you review the sample copy, you can select the job name from the printercontrol panel to print the additional copies.To release the remainder of prints after printing a sample set:1. Press the Job Status button. A list of pending print jobs appears on the Active Jobs window.2. Touch the corresponding print job in the list, then touch Release to start printing.Delay PrintYou can delay a print job for up to 24 hours from the original job submission time. Enter the time at whichyou would like the job to print. If the time you enter is earlier than the time that you submit the print job,it prints on the following day. The Delayed Print default time is midnight.Saved JobSaved Job allows you to save a print job to a folder on the printer. Using the controls in the Saved Jobswindow, you can save the job, or you can print and save the job for future use. You can also set the accessto the print job as follows: Public requires no passcode and allows any user to print the file from the control panel of the printer. Private requires a passcode so that only a user with the passcode can print the file.When the Saved Job is no longer needed, you can delete it from the control panel of the printer.Note: The system administrator must set up this feature before you can use it. For details, see theSystem Administrator Guide at www.xerox.com/office/WC75xxdocs.To print a saved job:1. Press the Services Home button.2. Touch the Print from icon.Note: If Print from USB is not enabled, the icon is labeled Reprint from Saved Job. If Reprint fromSaved Job is not enabled, the icon is labeled Print from USB. If neither function is enabled, the icondoes not appear.3. Use the arrows to the right of the list to scroll through the list and locate the printable file.If the print file is in a folder, touch the name to open the folder.
