Paper and MediaWorkCentre 7500 Series Multifunction Printer 55User GuideLoading Labels in Tray 5 (Bypass Tray)1. Remove all paper from the tray before loading labels.2. Load labels face down with the top of the sheet toward the front of the printer.3. Adjust the guides so they touch the edges of the stack.4. Verify the size, type, and color of the paper. Change the selection for any incorrect setting.5. On the printer touch screen, touch Confirm.Gloss PaperGloss paper can be printed from any tray.Guidelines for Printing on Gloss Paper Do not open sealed packages of gloss paper until you are ready to load them into the printer. Leave gloss paper in the original wrapper, and leave the packages in the shipping carton until readyto use. Remove all other paper from the tray before loading gloss paper. Load only the amount of gloss paper you are planning to use. Do not leave gloss paper in the traywhen you are finished printing. Reinsert unused paper in the original wrapper and seal. Rotate stock frequently. Long periods of storage in extreme conditions can cause gloss paper to curland jam in the printer. In the print driver software, select the desired gloss paper type or select the tray loaded with thedesired paper.
