Xerox WorkCentre WC7530 User Manual

Also see for WorkCentre 7525: Evaluator guide Quick use guide Quick use guide Quick use guide Specifications

Contents

Xerox WorkCentre WC7530 User Manual Manual pdf 212 page image

Troubleshooting212 WorkCentre 7500 Series Multifunction PrinterUser Guide8. If the original is not visible when the document cover is opened, lift up the document feeder tray,then remove the paper.9. Lower the document feeder tray.10. If the original is not wrinkled or torn, load it into the feeder again following the instructions on thetouch screen.Note: After clearing a document feeder jam, reload the entire document, including the pages alreadyscanned. The printer automatically skips the scanned pages and scans the remaining pages.CAUTION: Torn, wrinkled, or folded originals can cause jams and damage the printer. To copy torn,wrinkled, or folded originals, use the document glass.Clearing Jams in the Integrated Finisher1. Locate the Integrated Finisher mounted beneath the Scanner and Control Panel.2. Open the top cover of the finisher (1).3. Turn the green knob in the direction shown to remove the paper (2).4. Remove the paper by pulling it in the direction shown.Note: If the paper is torn, remove all torn pieces from the printer.215. Close the top cover of the Integrated Finisher.