Installation and SetupWorkCentre 7500 Series Multifunction Printer 33User Guide1. Insert the Software and Documentation disc into the appropriate drive on your computer. Theinstaller starts automatically. If the installer does not start, navigate to the drive on your computerand double-click Setup.exe.2. To change the language, click Language, select your language, then click OK.3. Click Install Drivers, then click Install Print and Scan Drivers.4. Click Agree to accept the license agreement.5. Select your printer from the list of discovered printers, then click Install.6. If your printer does not appear in the list of discovered printers, click Extended Search.7. If the printer still does not appear in the list of discovered printers, and you know the IP address:a. Click the Network Printer Icon (right) at the top of the gray window.b. Enter the IP Address or the DNS name for the printer.c. Click Search, then select your printer from the list of discovered printers.d. Click Next when the printer appears in the window.8. If the printer still does not appear in the list of discovered printers, and you do not know the IPaddress:a. Click Advanced Search.b. If you know the gateway address and subnet mask, click the top button and enter the addressesinto the Gateway and Subnet Mask fields.c. If you know the IP address of another printer on the same subnet, enter the address in the IPAddress field.d. Click Search, then select your printer from the list of discovered printers.e. Click Next when the printer appears in the window.9. Select the desired print driver: PostScript (recommended) PCL 5 PCL 6 XPS10. Select the desired scan driver: TWAIN WIA Enable Xerox® Scan Utility11. Click Install.12. Click Finish when the installation completes.Installing Drivers and Utilities for Macintosh OS X Version 10.4 and LaterInstall the Xerox ® print driver and the Xerox® scan driver to access all the features of your printer.To install the print and scan driver software:
