Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 8 APRIL 20078.1.20Open the Standard MClass block's E-mail Gateway screen.Enter the mail server DNS name in the Host ID field.If an SMTP login is required by the server then enter the SMTP User ID andPassword for the account.If the server requires a domain tag, enter the domain in the Domain field.Check the Adjust message retention box and click Save.Open the customer's Mailbox block and go to the E-mail Gateway screen.Set Enable E-Mail Gateway support to Yes.Enter the customer's office email address in the From field.Enter the customer's office email address in the Deliver MSG – 1 field.Enter the customer's home email address in the Deliver MSG – 2 field and clickSave.Test the application by leaving a message in the customer's voicemail box andverify that he receives an email containing the voicemail message as a WAV fileattachment.8.1.8.9 AMIS NetworkingScenario:A customer site has a 2 node SPNet network. They have requested thatsubscribers in the main node be able to forward messages to the voicemail inthe remote node.Planning:Sharing voicemail messages between disparate voicemail systems is calledAMIS networking. The OfficeServ 7100 fully support the AMIS standard throughthe use of Network Mailboxes.Setting up the networking between 2 Samsung voicemail systems is a 3 stageprocess. The first stage is to export the Subscriber List from the remote node.The second stage is to set up the Network Mailbox Template block in the mainnode with the correct dialing strings for the networking. The third stage is toimport the remote node's Subscriber List into the main node.For this example we will assume both nodes are OfficeServ 7100 systems.To export the Subscriber List go to the Subscriber screen on the remote node'svoicemail. Select the subscribers to export (or check the box in the upper left toselect all subscribers) and click Export Subscriber. This will trigger a prompt to