Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 MAY 2009MMC: 501CALLBACK NO ANS This timer controls the time before the callback isautomatically canceled when a callback detects Ring NoAnswer.CAMP ON RECALL This timer controls the duration of time a camped-on call willstay at a destination before recalling to the transferringstation.CID MSG RECEIVE The amount of time that the system will allow a validmessage from the C.O.CID DSP ALLOC TMCID DISPLAY TIME The amount of time that the Caller ID information remains onthe keyset’s display.C.O.-C.O. DISCONNECT This timer monitors the duration of an unsupervisedconference; when it expires, both trunks are disconnected.CONFIRM TONE TIME The tone heard when a feature is activated or deactivated.CRD TONE INT TM This is the call record tone interval time. An entry other thanzero will cause a tone to be heard by all the parties in arecorded conversation. The range for the tone is 001 (everysecond) to 255 (every 255 seconds). A value of 000 meansno tone. Requires SVMi-20E card.DIAL PASS TIME This timer monitors the duration of time before connectingthe transmit of the keyset to the trunk side of an outgoingcall.DISA DISCONNECT This timer controls the maximum duration of a DISA call.DISA DTMF DETECT This timer sets the time duration that DTMF can be receivedon a DISA line.DISA LOCK OUT TIMER This timer controls the duration of time a DISA call is notallowed to be made after the DISA error counter has expired(MMC 500).DISA NOANS DISC.DISA PASS CHECK This timer defines the time period before the system clearsthe incorrect passcode counter.DISA NO ACTION