Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 APRIL 2007MMC: 852ALMNO.ALMCODE ALARM DEFINITION50 MJD19 PRI RestartThe PRI card has restartedAlarm Data = Cabinet, Slot (C1,2) (S1through 10)51 MJD20 BRI RestartThe BRI card has restartedAlarm Data = Cabinet, Slot (C1,2) (S1through 10)52 MJD21 PCM LossLoss of PCM coding on a digital facility.Alarm Data = Cabinet, Slot (C1,2) (S1through 10)53 MJD22 PCM RecoveryRecovery of PCM coding on a digitalfacility.Alarm Data = Cabinet, Slot (C1,2) (S1through 10)54 MJE01 MGI Restart An MGI card has restarted.55 MJE02 MGI Stop An MGI card has stopped.56 MJE03 MGI IP Duplicate MGI IP address conflict.57 MJE04 MGI Ntwk Error58 MJE05 MGI Ntwk Rec. MGI Recovery.59 MJE06 MGI DSP Error60 MJE07 MGI DSP RunMJE10 SVM Card Restart Card RestartedMJE11 SVM Card Halt Card HaltedMJE12 SVM Card Down Card When DownMNF32 SVM Card Ready Alarm Code when voicemail is ready.MNF33 SVM Card Request Alarm Code when voicemail request thenumber to MCP after restarting.61 MNF01 Card OutA circuit card mounted in a universal slothas been removed from service or is notrecognized by the Common ControlProcessorAlarm Data = Cabinet-Slot (C1,2)-(S 1through 10)62 MNF02 Card InA circuit card mounted in a universal slothas been returned to service.Alarm Data = Cabinet-Slot (C1,2)-(S 1through 10)63 MNF03 IPC ErrorInter processor communication errorhas occurred.Alarm Data = Cabinet-Slot (C1,2)-(S 1through 10)