Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 MAY 2009MMC: 830 Public IP Only – use when MP10/MP10a IP address is exposed to the publicnetwork.• SYSTEM PUBLIC IP: The MP10/MP10a will originate communications, toITP/VOIP devices outside the local network, using this IP address.Communications to/from this IP will require involvement of the MGI resources.The system identifies communications to/from this address as “public”. Thisallows devices, on remote networks/subnets, to establish communications withthe system, without exposing your LAN. See “SYSTEM IP TYPE.”• SYSTEM MAC ADDR: For your reference, and cannot be changed. The uniquehardware (MAC) address of the MP10/MP10a card.• SYSTEM IP VERS: No entry required. Reserved for future use.• CTI SERVER ADDRESS: This entry determines the IP address of the serverrunning the OfficeServ Link application. If set, only this IP address is allowed toconnect to the OfficeServ 7100. The default setting of 0.0.0.0 allows the OS Linkserver to connect regardless of the IP address.• NEWS ADDRESS: Not for use in the USAPROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCACTION DISPLAY1. Press TRANSFER 830.Display shows the system IP address.SYSTEM IP ADDR192.168.9.2092. Press RIGHT soft key to move cursor on IPaddress line.SYSTEM IP ADDR192.168.9.2093. Using the keypad enter three digit IP octetnumbers IE 192 168 001 010 for 192.168.1.10SYSTEM IP ADDR192.168.001.0104. Cursor will return to Step 1 upon completionof IP address entry.SYSTEM IP ADDR192.168. 1. 105. Press UP or DOWN key to make selection.Press RIGHT soft key to move cursor.SYSTEM GATEWAY192.168. 9. 2