Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 JANUARY 2009MMC: 763 SECOND LCRDESCRIPTION:This MMC extends system Least Cost Routing tables to accommodate sites withvery large networks or where specialized dialing formats are required. It uses a tableof 198 entries containing telephone numbers that can be optionally translated andsent to a custom destination. The options are as follows:0. IN DIGIT: This option determines the dial string to match on. Thisnumber will be dialed after dialing an E-LCR FEATURE CODE.Up to 16 digits may be entered into this field.1. OUT DIGIT: This is the digit string that will be sent to the NEXT ROUTEinstead of the IN DIGITS. Up to 16 digits may be entered intothis field.2. USE LCR NUM: This option determines which E-LCR FEATURE CODE shoulduse this digit translation. Valid entries are as follows:ALL All E-LCR feature codes will use this translation. This is thedefault setting.E-LCR1Enter the E-LCR1 FEATURE CODE from MMC 724. Thissetting makes the digit translation active only for calls thatare dialed after the E-LCR1 FEATURE CODE.E-LCR2Enter the E-LCR2 FEATURE CODE from MMC 724. Thissetting makes the digit translation active only for calls thatare dialed after the E-LCR2 FEATURE CODE.E-LCR3Enter the E-LCR3 FEATURE CODE from MMC 724. Thissetting makes the digit translation active only for calls thatare dialed after the E-LCR3 FEATURE CODE.E-LCR4Enter the E-LCR4 FEATURE CODE from MMC 724. Thissetting makes the digit translation active only for calls thatare dialed after the E-LCR4 FEATURE CODE.