Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 APRIL 2007MMC: 846 WIP INFODESCRIPTION:[MMC846] is used to display the handset information and set some parameters.You can change USER ID, PASSWORD, and INSERT DGT.No. Parameter Description0 REGISTERED Indicates whether the corresponding handset is registered1 LOCATED Indicates whether the corresponding handset is currently connected tothe system2 PHONE TYPE Indicates the type of the handset5 IP OFFSET Location of the IP pool where the IP assigned to handset is located6 IP ADDRESS IP address assigned to the registered handset7 MAC ADDR MAC address of the registered handset8 USER ID Sets ID by the handset user9 PASSWORD Sets password by the handset user10 INSERT DGT If the number of digits you pressed when originating a call in handset ismore than 5, the set INSERT DGT is inserted before the number youpressed.However, the number you pressed should not be C.O. Line number, C.O.Line group number, LCR, network LCR, or number starting with thefunction codeACTION DISPLAY1. Select the MMC number [846]. [3301] REGISTEREDNO2. Select a desired handset number.Or select a desired handset number[3301] REGISTEREDNOusing the [▼Volume▲] button, and press[RIGHT] soft button to move the cursor.3. Enter a desired item number.Or select a desired item using the[3301] LOCATEDDETACH[▼Volume▲] button, and press [RIGHT]soft button to move the cursor.