Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 APRIL 2007MMC: 306 HOT LINEDESCRIPTION:Allows a station the ability to make a predetermined call similar to a ringdowncircuit, upon the expiration of a timer (see MMC 502 STN TIMERS, Off-HookSelection Timer). The hotline destination can be a station, a station group, a trunk, atrunk group or an external number. There can be a maximum of 18 digits in the dialstring for the external number. The access code for the trunk or trunk group accesscode is not counted as part of the 18.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entryB Used to insert a flash code “F”C Used to insert a pause code “P”D Used to insert a pulse/tone conversion code “C”E Used to mask/unmask following digits—shows as “[” or “]”F Used to enter name for speed dial bin (see MMC 106)ACTION DISPLAY1. Press TRANSFER 306Display shows[201] HOT LINENONE2. Dial station numberOR[205] HOT LINENONEUse UP or DOWN to scroll through stationsPress RIGHT soft key to move the cursor.3. Enter the hot line destination ie a stationor trunk ID (e.g., 9 or 701) with a maximum[205] HOT LINE9-1305P4264100_of 24 outgoing digits after the access codefor the CO call (see above list of options ifneeded).Bottom row of program keys are options B–E.