8686[Destination path name]Configure the settings for the destination directory tobe used for the XML notification of the face detection.[User name]Enter a user name.Available number of characters: 0 - 32 charactersDefault: None (blank)Configuration of the settings relating to the face detection[Face detection]Click the [Face detection] tab on the "Advanced func." page.The settings relating to displaying the frame to be used for the face detection and the settings relating to the facedetection information attached to the image can be configured.Important:• The face detection function shall not guarantee the detection of faces in an image. The face detection accuracyvaries with imaging conditions.[Password]Enter a password.Available number of characters: 0 - 32 charactersDefault: None (blank)■ Face detection[Face detection]Determine whether or not to enable the face detectionfunction.On: Information about the face detection frame will beattached and the test frame will be displayed on theimage of this page.Off: Information about the face detection frame will notbe attached. No face detection frame will be dis-played on the image of this page.Default: OffImportant:• When "Mosaic" is selected for "Display type" of"Privacy zone", the face detection function maysometimes be triggered (the face detection framewill be displayed). SW395 SC385[XML notification]The destination settings of the face detection informa-tion can be configured.When clicking "XML notification>>", the [XML notifica-tion] tab will be displayed. (☞ Page 85)
