1414Monitor images on a cellular phoneIt is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only) fromthe camera on the screen of the cellular phone. It is also possible to refresh images to display the latest image orperform panning, tilting and zooming operations.Important:• When the authentication window is displayed, enter the user name and password. The default user name andpassword are as follows.User name: adminPassword: 12345To enhance the security, change the password for the user "admin". (☞ page 87)• If the cellular phone in use is not compatible with UTF-8 encode, it is impossible to display the screen correctly.Note:• It is necessary to configure the network settings of the cellular phone in advance to connect to the Internet andmonitor images from the camera. (☞ Page 93)Step 1Access to "http://IP address/mobile"* or "http://Hostname registered in the DDNS server/mobile" using acellular phone.→ Images from the camera will be displayed.Note:• When the HTTP port number is changed from "80",enter "http://IP address + : (colon) + port number/mobile"* in the address box of the browser.• When using the DDNS function, access to "http://Host name registered in the DDNS server + : (colon)+ port number/mobile".• Refer to "Access the camera using the HTTPS pro-tocol" (☞ page 106) for further information about thecase in which "HTTPS" is selected for "HTTPS" -"Connection" on the [Network] tab of the "Network"page.• When the authentication window is displayed, enterthe user name of an administrator or user and pass-word. Depending on the cellular phone in use, pass-word entry may be required each time the screen isswitched.• It is impossible to transmit/receive audio using acellular phone.• Depending on the cellular phone in use, larger sizeimages may not be displayed. In this case, selecting"Low" for "Image quality setting" of "JPEG"(☞ page 48) may sometimes solve this problem.• Depending on the cellular phone in use or its con-tract plan, it may be impossible to access.* IP address is the global WAN IP address of the rout-er that can be accessed via the Internet.Pan/tiltZooming controlRefreshResolutioncontrolImage qualitycontrolHome positionAUX controlPreset
