120120Configure the settings relating to the schedules[Schedule]On the "Schedule" page, it is possible to configure the settings relating to schedules as follows.• Alarm permission (Alarm input will be received only in the specified schedule.)• VMD permission (Video motion detection will be active only in the specified schedule.)• Access permission (Access to the camera will be allowed only in the specified schedule.)• H.264 recording (SD recording will be performed only in the specified schedule.)• Position refresh (Camera position will be refreshed only in the specified schedule.)The "Schedule" page has only the [Schedule] tab.Up to 5 schedules can be set.Step 1Select an action to be assigned to the schedule from"Schedule mode"."Off" is selected at the default.Off: No action will be taken for the respective schedule.Alarm permission: Alarm input (terminal alarm) will bereceived during the period of the schedule.VMD permission: The video motion detection (VMD)function will be active during the period of theschedule.Access permission: Users whose access level is set to2 and 3 on the "User auth." tab (☞ page 87) canaccess the camera only in the period of schedule.H.264 recording: The SD recording will be performedat the designated time in the schedule.Position refresh: The camera position will be refreshedat the designated time in the schedule.1-64: The camera will move to the designated presetposition at the designated time in the schedule.Note:• Select "On" for "User auth." on the [User auth.] tabof "User mng." page (☞ page 87) and "Off" for"Host auth." on the "Host auth." page (☞ page 88)to validate "Access permission".• When selecting "H.264 recording", select "H.264"for "Recording format" on the [SD memory card] taband select "Schedule" for "Save trigger". (☞ Page34)Step 2Select days of a week by checking the respectivecheckboxes.Step 3Click [C] to select the start time and the end time of theschedule.When not designating time, check the checkbox of"24h".Step 4Click the [Set] button after completing the settings.→ The result will be displayed at the bottom of thewindow.Note:• The schedules displayed at the bottom of the win-dow can be identified by colors assigned to eachschedule.
