2020Display the log listThe setting items of the cameras will be displayed in list form.• Alarm log: Logs of the alarm occurrences such as time and date of the alarm occurrences and thealarm type will be displayed.• Manual/Schedule log: Logs filed when images have been recorded manually or during the period of the sched-ule on the SD memory card will be displayed.• FTP trans. error log: Logs filed when the FTP periodic image transmission function has failed will be dis-played.Each log list can be displayed only when "On" is selected for "Save logs" on the [Log] tab of the "Basic" page(☞ page 43) respectively.Step 1Display the "Live" page. (☞ Page 6)Step 2Click the [List] button.→ The log list will be displayed in a newly opened win-dow (log list window).Number of the listedlogsImportant:• Only a single user can operate the log list window.Other users cannot access the log list window.Note:• When "Not use" is selected for "SD memory card",the "Manual/Schedule log" list and the "FTP trans.error log" list will not be displayed.• When "H.264" is selected for "Recording format" ofthe SD memory card, the "FTP trans. error log" listwill not be displayed.Step 3Click the desired log type listed below "Log" to displaythe log list.→ The log list of the selected log type will be dis-played.Note:• When any images are saved on the SD memorycard, the image can be displayed by clicking Timeand Date when "JPEG" is selected for "Recordingformat" of the setup menu. (☞ Page 33)About the log list windowNumber of the listed logsTotal number of the logs of the selected log type and anumber of the log being displayed on the top of the loglist will be displayed.Note:• Enter the desired log number and press the [Enter]key on the keyboard. The log of the designatednumber will be displayed on the top of the log list.[Top] buttonClick this button to display the log listed at the top.
