5858Configure the settings relating to images and the preset posi-tions [Image/Position]Click the [Image/Position] tab on the "Image/Audio" page. (☞ Pages 26 and 27: How to display/operate the setupmenu)When the [Setup>>] button of each setting item is clicked, the detailed settings menu will be displayed in a newlyopened window. The detailed settings can be configured while monitoring images displayed on the [Image/Position]tab.The following are descriptions of how to configure the settings relating to image quality, preset positions, auto panfunction, privacy zone, etc.[Image adjust]Click the [Setup>>] button to display the setup menuthat can configure the settings relating to image quality.The setup menu will be displayed in a newly openedwindow.(☞ Page 59 ) SW395 SC385(☞ Page 63 ) SC384[Preset position]Click the [Setup>>] button to display the setup menuthat can configure the settings relating to the presetpositions. The setup menu will be displayed in a newlyopened window. (☞ Page 67)[Auto pan]Click the [Setup>>] button to display the setup menuthat can configure the settings relating to the auto panfunction. The setup menu will be displayed in a newlyopened window. (☞ Page 70)[Privacy zone]Click the [Setup>>] button to display the setup menuthat can configure the settings relating to the privacyzone. The setup menu will be displayed in a newlyopened window. (☞ Page 71)Note:• The pan/tilt-flip function cannot be activated byclicking live images.• When the zoom ratio is adjusted to the "TELE" side,images will be partially hidden even if the pan/tilt-flip function is activated.
