49Configure the settings relating to H.264 images [JPEG/H.264]Click the [JPEG/H.24] tab on the "Image/Audio" page. (☞ Pages 26 and 27: How to display/operate the setupmenu)[JPEG/H.264] tab will be displayed when "H.264" is selected for "Video encoding format".Configure the settings relating to H.264 image such as "Max bit rate (per client)", "Image capture size", "Imagequality", etc. in this section. Refer to page 53 and 47 for the settings relating to MPEG-4 images and JPEG imagesrespectively.[Video encoding format]Select "H.264" for the video encoding format.H.264: H.264 will be set for the video encoding format.The subsequent setting items will be for H.264. Thetab name will be changed to [JPEG/H.264].MPEG-4: MPEG-4 will be set for the video encodingformat. The subsequent setting items will be forMPEG-4. (☞ Page 53)The tab name will be changed to [JPEG/MPEG-4].Default: H.264■H.264 (1) · H.264 (2)[H.264 transmission]Select "On" or "Off" to determine whether or not totransmit H.264 images.On: Transmits H.264 images.Off: Does not transmit H.264 images.Default: OnNote:• When "On" is selected for "H.264 transmission" in"H.264(1)" or "H.264(2)", displaying of H.264 imagesor JPEG images on the "Live" page will becomeavailable.• When "On" is selected for "H.264 transmission" in"H.264(1)" and "H.264(2)", H.264 images are view-able using other devices with each setting.• When "On" is selected for "H.264 transmission" in"H.264(1)" or "H.264(2)", the transmission interval ofJPEG images may sometimes become longer.• When "H.264" is selected for "Recording format" , itis impossible to transmit H.264 images with the set-tings for "H.264(2)". In this case, the settings for"H.264(2)" are invalidated.[Internet mode (over HTTP)]Select "On" when transmitting H.264 images via theInternet. It is possible to transmit H.264 images withoutchanging the broadband router settings configured forJPEG image transmission.On: H.264 images and audio will be transmitted usingthe HTTP port. Refer to page 94 for further informa-tion about the HTTP port number settings.Off: H.264 images and audio will be transmitted usingthe UDP port.Default: OffNote:• When "On" is selected, only "Unicast port (AUTO)"will be available for "Transmission type".• When "On" is selected, it may take time to start dis-playing H.264 images.
