Panasonic WV-SC384 Operating Instructions Manual

Also see for WV-SC384: Integration note Product catalog Installation guide Operating instructions Specifications

Contents

Panasonic WV-SC384 Operating Instructions Manual Manual pdf 6 page image

66Monitor images on a PCThe following are descriptions of how to monitor images from the camera on a PC.Monitor images from a single cameraImportant:• When the HTTP port number is changed from "80",enter "http://IP address of the camera + : (colon) +port number" in the address box of the browser.(Example: http://192.168.0.11:8080)• When the PC is in a local network, configure theproxy server setting of the web browser (under"Internet Options…" under "Tools" of the menu bar)to bypass the proxy server for the local address.Note:• Refer to "Access the camera using the HTTPS pro-tocol" (☞ page 106) for further information about thecase in which "HTTPS" is selected for "HTTPS" -"Connection" on the [Network] tab of the "Network"page.Step 3Press the [Enter] key on the keyboard.→ The "Live" page will be displayed. Refer to page 8for further information about the "Live" page.When "On" is selected for "User auth.", the authentica-tion window will be displayed before displaying liveimages for the user name and password entries. Thedefault user name and password are as follows.User name: adminPassword: 12345Step 1Start up the web browser.Step 2Enter the IP address designated using the Panasonic IPsetup software in the address box of the browser.Example when entering an IPv4 address:http://URL registered using IPv4 addresshttp://192.168.0.10/Example when entering an IPv6 address:http://URL registered using IPv6 addresshttp://[2001:db8::10]/