116116Configure the settings relating to SNMP [SNMP]Click the [SNMP] tab on the "Network" page. (☞ Pages 26 and 27: How to display/operate the setup menu)The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera byconnecting to the SNMP manager. When using the SNMP function, contact the network administrator.[Community]Enter the community name to be monitored.Available number of characters: 0 - 32 charactersDefault: None (blank)Important:• When using the SNMP function, it is necessary toenter the community name. When no communityname is entered, the SNMP function will not work.[System name]Enter a system name to be used to manage the camerawith the SNMP function.Available number of characters: 0 - 32 charactersDefault: None (blank)[Location]Enter the name of the location where the camera isinstalled.Available number of characters: 0 - 32 charactersDefault: None (blank)[Contact]Enter the mail address or the phone number of theSNMP manager.Available number of characters: 0 - 255 charactersDefault: None (blank)Configure the settings relating to the FTP periodic image trans-mission [FTP img. trans.]Click the [FTP img. trans.] tab on the "Network" page. (☞ Pages 26 and 27: How to display/operate the setupmenu)The settings relating to the periodic transmission of images to an FTP server can be configured on this page. Totransmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance(☞ page 91). Refer to page 118 for descriptions of how to configure schedules of image transmission.Important:• Depending on the network line speed or the network traffic, images may not be transmitted at the exact desig-nated interval or period.• Select "FTP error" for "Save trigger" on the [SD memory card] tab when using the FTP periodic transmissionfunction.• When "On" is selected for both of the alarm image transmission function and the FTP periodic image transmis-sion function, the alarm image transmission function will be given priority over the FTP periodic image transmis-sion function. For this reason, images may not be transmitted at the exact designated interval or period if alarmsoccur frequently.Note:• When "FTP error" is selected for "Save trigger" on the [SD memory card] tab, images that have failed to transmitusing the FTP periodic image transmission can be saved automatically on the SD memory card.(☞ Page 19)
