|
105Configuration of the connection protocolStep 1Select "HTTP" or "HTTPS" for "Connection" to deter-mine the protocol used to access the camera.HTTP: Only the HTTP connection is available.HTTPS: Only the HTTPS connection is available.Step 2Designate the HTTPS port number to be used for"HTTPS port".Available port number: 1 - 65535Default: 443The following port numbers are unavailable since theyare already in use.20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161,162, 554, 995, 10669, 10670, 59000 - 61000Step 3Click the [Set] button.→ The camera will restart, and it will become possibleto access to the cameras using the HTTPS protocol.(☞ Page 6: Monitor images on a PC, page 14:Monitor images on a cellular phone)Note:• This camera will restart after the connection settingis changed.• Notation when using the self-signed certificate:If the camera is accessed using the HTTPS protocolfor the first time, the warning window will be dis-played. In this case, follow the instructions of thewizard to install the self-signed certificate.(☞ Page 106)• Notation when using the server certificate:In advance, install the root certificate and intermedi-ate certificate on the browser in use. Follow theinstructions of CA for how to obtain and install thesecertificates.• When the camera is accessed using the HTTPS pro-tocol, the refresh interval and frame rate of imagesmay be lower.• When the camera is accessed using the HTTPS pro-tocol, it may take time to display images.• When the camera is accessed using the HTTPS pro-tocol, the images may be distorted or audio may beinterrupted.• The maximum number of concurrent access uservaries depending on the maximum image size andtransmission format.
|
