5656*1 It is necessary to designate the unicast port numberwhen "Unicast port (MANUAL)" is selected for"Transmission type".*2 It is necessary to designate the multicast IP addresswhen "Multicast" is selected for "Transmissiontype".Configure the settings relating to the camera operations[Cam. Function]Click the [Cam. Function] tab on the "Image/Audio" page. (☞ Pages 26 and 27: How to display/operate the setupmenu)Configure the settings relating to camera operations.[Home position]A preset position (☞ page 67) can be set as the homeposition.When a preset position is set as the home position, "H"will be displayed next to the preset position number.Default: OffNote:• To move the camera to the home position when thepower of the camera is turned on, select "Homeposition" for "Self return".[Self return]When the time set for "Self return time" has passedafter manual operations of the camera, the camera willautomatically be in the selected mode.Off: Self return is not performed.Home position: When the set time has passed, thecamera will move to the home position automati-cally.Auto track SW395 SC385 : When the set time haspassed, the camera will move to the home positionand will start the auto track function. The camerawill repeat this action (moving to the home positionand starting the auto track function) afterward.Auto pan: When the set time has passed, the camerawill start the auto pan function.Preset sequence: When the set time has passed, thecamera will start the sequence display.Default: OffNote:• This function is also useful to automatically set thecamera in a specific mode when the power of thecamera is turned on.• The self return function works even when the setupmenu is displayed.[Self return time]Select a waiting time (amount of time until the camerastarts the selected operation after the end of the man-ual operations) from the following.10s/ 20s/ 30s/ 1min/ 2min/ 3min/ 5min/ 10min/ 20min/30min/ 60minDefault: 1min[Image hold]Select "On" or "Off" to determine whether or not tohold the still image on the screen (that is displayed atthe last moment before the camera started to move to apreset position) until the camera has moved to the pre-set position.
