8080Change the AUX name [Alarm]Click the [Alarm] tab on the "Alarm" page. (☞ Pages 26 and 27: How to display/operate the setup menu)The names of "AUX", "Open" and "Close" on the "Live" page can be changed.■ AUX title[AUX (Up to 10 characters)]Enter the name for "AUX" on the "Live" page.Default: AUX[Open (Up to 5 characters)]Enter the name for "Open" of "AUX" on the "Live" page.Default: Open[Close (Up to 5 characters)]Enter the name for "Close" of "AUX" on the "Live"page.Default: CloseNote:• AUX is a camera terminal that allows users to oper-ate (Open/Close) arbitrarily from the "Live" page.For example, an operator can remotely control lightsin a place where the camera is installed by connect-ing the terminal to the light controller.Configure the VMD settings [VMD area]Click the [VMD area] tab on the "Alarm" page. (☞ Pages 26 and 27: How to display/operate the setup menu)The video motion detection areas can be set on this page.The VMD areas can be set for each preset position (up to 4 areas, 64 preset positions). When motion is detected inthe set area, it will be regarded as an alarm. The camera can be configured to take an alarm action even when thecamera is not at the preset position.Important:• The alarm occurrence indication button (☞ page 11) will be displayed when motion is detected by the VMDfunction.• The alarm occurrence indication button will be displayed when receiving an alarm input of a terminal alarm or acommand alarm.• Depending on the network environment, notification may be delayed even when "Real time" is selected for"Alarm status update mode" on the [Basic] tab of the "Basic" page (☞ page 32).• The motion detection function is not the dedicated function to prevent thefts, fires, etc. We are not responsiblefor any accidents or damages occurring in case.
