5AbbreviationsThe following abbreviations are used in these operating instructions.Microsoft® Windows® 7 Professional (64-bit) and Microsoft® Windows® 7 Professional (32-bit) are described asWindows 7.Microsoft ® Windows Vista® Business SP1 (32-bit) is described as Windows Vista.Microsoft ® Windows® XP Professional SP3 is described as Windows XP.Windows ® Internet Explorer® 8.0, Windows® Internet Explorer® 7.0 and Microsoft® Internet Explorer® 6.0 aredescribed as Internet Explorer.SDHC/SD memory card is described as SD card or SD memory card.Universal Plug and Play is described as UPnPTM or UPnP.Viewer softwareIt is necessary to install the viewer software "Network Camera View 4S" to display images on a PC. This softwarecan be installed directly from the camera or by double clicking "nwcv4Ssetup.exe" on the CD-ROM provided, andthen following the on-screen instructions.Important:• The default setting of "Automatic installation of Viewer software" is"On". Follow the instructions on page 139 when the message isdisplayed on the information bar of the browser.• When the "Live" page is displayed for the first time, the install wiz-ard of the ActiveX control required to display images from the cam-era will be displayed. Follow the instructions of the wizard.• When the install wizard is displayed again even after completingthe installation of the ActiveX, restart the PC.• The viewer software used on each PC should be licensed individu-ally. The number of installations of the viewer software from thecamera can be checked on the [Upgrade] tab of the "Maintenance"page (☞ page 122). Refer to your dealer for the software licensing.
