77Configure the settings relating to the alarm image [Alarm]Click the [Alarm] tab on the "Alarm" page. (☞ Pages 26 and 27: How to display/operate the setup menu)The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section. Thealarm image will be transmitted to an FTP server. To transmit alarm images to an FTP server, it is necessary to con-figure the settings in advance. (☞ Page 91)Important:• Depending on the network line speed or the network traffic, images may not be transmitted at the exact desig-nated interval or period.• When "Alarm input" or "Manual" is selected for "Save trigger" on the [SD memory card] tab, images will not betransmitted to the FTP server even when an alarm is detected. (☞ Page 34)■ Alarm image[FTP >>]When "FTP >>" is clicked, the [FTP] tab of the "Server"page will be displayed. (☞ Page 91)[Alarm image FTP transmission]Select "On" or "Off" to determine whether or not totransmit the alarm image to the FTP server.Default: Off[Directory name]Enter the directory name where the alarm images are tobe saved.For example, enter "/ALARM" to designate the direc-tory "ALARM" under the root directory of the FTPserver.Available number of characters: 1 - 256 characters[File name]Enter the file name used for the alarm image to betransmitted to an FTP server. The file name will be asfollows.File name: ["Entered file name" + "Time and date (year/month/ day/ hour/ minute/ second)"] + "Serial number"Available number of characters: 1 - 32 characters[Post alarm]• Transmission intervalSelect the transmission interval for the alarm imagetransmission to the FTP server from the following.0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fpsDefault: 1fps• Number of imagesSelect the number of images to be transmitted fromthe following.1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/200pics/ 300pics/ 500pics/ 1000pics/ 2000pics/3000picsDefault: 100pics• Recording durationApproximate time to be taken to save the set"Number of images" with the set "Transmissioninterval" will be displayed.[Image capture size]Select the capture size of images to be transmitted tothe FTP server or of an image to be attached to thealarm mail.When "4:3(VGA)" is selected for "Aspect ratio"QVGA/ VGA/ 1280x960When "4:3(800x600)" is selected for "Aspect ratio"SW395 SC385QVGA/ 800x600/ 1280x960When "16:9" is selected for "Aspect ratio"320x180/ 640x360/ 1280x720Default: VGA
